Sinoboom 23.6M Diesel Articulating Boom Lift – Extra Capacity
Maximum working height of 23.6M and a horizontal reach of up to 13.35M with extra capacity of up to 454kg
This articulated jib has a maximum extra platform capacity of up to 454kg (restricted) with a gradability of up to 40%, and horizontal reach of up to 13.35M.
Has a narrow width and is ideal for construction sites such as installing windows, roofing and exterior finishing as well as maintenance or repair work on multi-story buildings. Useful for industrial facilities, infrastructure projects, utility work and agricultural applications and remote locations where electric power might not be available.
Our knowledgeable support team is always available to assist with any questions or concerns you may have. You can book a demo with one of our access specialists. Genuine spare parts are also available and our specialist technicians can help keep your machine in tip top working condition.
Specifications
| Working Height | 23.6M |
| Weight | 12000kg |
| Platform Capacity | 454kg / 340kg / 230kg |
| Power | Cummins QSF2.8T3NA60 43 kW / China T3, EU Stage 3A |
| Horizontal Reach | 13.95m / 12.45m / 11m |
| Up & over Clearance | 8.9M |
Features
- Great rough terrain performance due to active oscillating function, combined with 4 wheel drive, 40% gradeability and high ground clearance.
- Large platform capacity with room for up to 2 people and tools
- Efficient hydraulic system with function pump upgraded to piston pump for more oil flow and higher oil pressure
- Greater tilt rating and ultimate HMI experience
- Max Working Height 23.6 m
- Max Platform Height 21.6 m
- Max Horizontal Reach 13.95m / 12.45m / 11m
- Max Up and Over Clearance 8.9m
- Length-Stowed 9.95 m
- Width-Stowed 2.49 m
- Height-Stowed 2.68 m
- Wheelbase 2.49 m
- Ground Clearance 0.42m
- Platform Size (L×W×H) 2.44m × 0.91m × 1.1 m
- Capacity 454kg / 340kg / 230kg
- Drive Speed (Stowed) 0～4.8 km/h
- Drive Speed (Raised) 0～1.1 km/h
- Gradeability 40%
- Turntable Rotation 360o continuous
- Platform Rotation 180o
- Tilt Rating 5o
- Turning Radius (Inside/Outside) 2.4 m/ 5.55 m (2 wheel steering)
- Turning Radius (Inside/Outside) 1.63 m/ 3.59 m (4 wheel steering)
- Turntable tail swing 0.89m
- Max Allowable Side Force 400 N
- Max allowable wind speed 12.5 m/s
- Tire Spec/Type 36×14-20 (solid)
- Drive × Steer 4WD×2WS
- Hydraulic Tank Capacity 130L
- Fuel Tank Capacity 100L
- Cummins QSF2.8T3NA60 43 kW / China T3, EU Stage 3A
- System Voltage 12V DC
- 4 WD × 4 WS
- Hydraulic Platform Levelling
- Proportional control with 3 joysticks
- Tilt protection system
- 7-in smart screen
- Automotive-grade sleeves for all pipes
- Secondary guarding device
- Telematics-ready connector
- Emergency lowering system
- Active oscillating function
- Non-marking tyres
- Battery isolator
- Max tilt to 5 degrees
- Continuous turntable rotation at 360 degrees
- Rotating warning light for safety warning
- Horn and buzzer for safety warning
- Fault diagnostic system
- Rear position and travel confirmation
- Mechanical release for travel braking
- Platform with inward swinging gate
- Tool box (for platform with inward swinging gate)
- Emergency stop system
- Four-wheel brake
- Platform rotation function
- Manual storage box
- Fault diagnostic system
- Voice broadcast
- Four wheel steering
Options & Accessories
- AC power to platform
- Platform work light
- Hydraulic generator
Each elevated work platform comes with an impressive factory warranty and a comprehensive After Sales Support programme supported by YR Connect, YR’s cloud-based online solution for maintenance, servicing, warranty and location services to protect against theft.
Warranty:
- Structural: 5 Years
- Mechanical, Electrical, Hydraulic: 2 Years
- Engine: 2 Years